QI Series Ball Joint
1)Round smoothly without stagnation;
2)Thread precision:grade 6H;
3)Ball pin:1045 Carbon steel or 40 Cr steel;
4)Ball housing:1045,1020 Carbon steel or stainless steel;
5)Durability testing:proucts can be in -30℃ to 100℃ can normal use,and can reach 500000 times;
6)Lubricant:Ball housing has adequate lubricant;
7)Refers to QC/T327-1999 and relevant standards.
QD Series Ball Joint
1)Round smoothly without stagnation;
2)Thread precision:grade 6H;
3)Ball pin:1045 Carbon steel or 40 Cr steel;
4)Ball housing:1045,1020 Carbon steel or stainless steel;
5)Durability testing:proucts can be in -30℃ to 100℃ can normal use,and can reach 500000 times;
6)Lubricant:Ball housing has adequate lubricant;
7)Refers to QC/T327-1999 and relevant standards.
NOS SA PK Series Rod End Bearing
1)Rod ends with right or left thread;
2)Bearings are firmly seated and located in the housing;
3)Bearing housing has not oil-spile;
4)Outer ring of PTFE,sliding surface of PTFE-composite material;
5)inner ring of carbon chromium steel,spherical surface;
6)Zinc plated or Cr plated or black oxide.
NHS SI PK Series Rod End Bearing
1)Rod ends with right or left thread;
2)Bearings are firmly seated and located in the housing
3)Bearing housing has not oil-spile;
4)Outer ring of PTFE,sliding surface of PTFE-composite material;
5)inner ring of carbon chromium steel,spherical surface;
6)Zinc plated or Cr plated or black oxide.
SAJK POS Series Rod End Bearing
1)Rod ends with right or left thread;
2)Outer race lined with bronze liner;
3)Surface of rod body zinc plated or Gr plated;
4)POS,PHS with grease nipple,SAJK,SIJK withou grease nipple;
5)POS,PHS head part is small,but they can substitute.
SIJK PHSseries Rod End Bearing
1)Rod ends with right or left thread;
2)Outer race lined with bronze liner;
3)Surface of rod body zinc plated or Gr plated;
4)POS,PHS with grease nipple,SAJK,SIJK withou grease nipple;
5)POS,PHS head part is small,but they can substitute.