The seal between the ball joint and the valve body adopts a hard seal structure, which is suitable for high temperature and high pressure conditions. Because the valve seat is composed of carbon fiber reinforced sealing ring and disc spring, the ball joint has strong adaptability to changes in pressure and temperature, and will not produce any leakage within the marked pressure and temperature range. The machining process of the ball joint is detected by an advanced computer detector, so the machining accuracy of the ball is high. During the use of the ball joint, since the material of the valve body is the same as that of the pipeline, there will be no uneven stress, nor will it be deformed when the vehicle passes the ground, and the pipeline is resistant to aging.
The size of the sealing contact surface between the ball joint and the valve body is small, and the precision of each sealing surface is high. In the assembled type, the ball joint is installed with an electric impact wrench. Not only is the retainer meshing with the valve body to prevent loosening, but also the ball joint rubs and rotates. In line with the principle of mechanical vibration meshing, the ball joint and the valve body are reliably sealed. The ball joint has two and four sealing structures, and the tube core hole has two structural forms, L-shaped and T-shaped. By controlling the rotation angle of the tube core, the connection state of the tube core hole and the pipe port can be changed, and different combinations of the ball joint can be realized. control.
The ball joint has a large flow capacity and can control gas, liquid and steam, and is more suitable for controlling high-viscosity, fibrous and granular fluids. It is also suitable for occasions with strict sealing requirements. The ball joint has the action of rotating 90 degrees, and the cock body is a sphere with a circular through hole or channel passing through its axis. The ball joint is mainly used for cutting, distributing and changing the flow direction of the medium in the pipeline. The ball joint only needs to be rotated 90 degrees and a small torque can be closed tightly. Ball joints are suitable for use as switches and shut-off valves, but recent developments have designed ball joints to allow them to throttle and control flow, such as V-shaped ball joints.
The ball joint is suitable for connecting or cutting off the medium flow of the pipeline in the vacuum system. The valve adopts a rotary type electric and electronic regulating valve drive device, and the ball joint can realize the valve opening, closing or intermediate position control through the switching of external power supply (manual index switch or computer control) or external input signal. The ball joint is a straight-through type and is sealed by a spherical surface, so it can be used in both vacuum and low pressure conditions. And can be installed anywhere. In order to prevent static electricity, steel balls and springs are installed between the dowel rod and the ball, as well as between the dowel rod and the stuffing box, which can keep all parts of the ball joint and the valve body conductive, allowing the current to pass through the area and release static electricity. It not only prevents fire, but also prevents corrosion, and realizes temporary cut-off for timely maintenance.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy
